How to Install Android 4.1.2 Jelly Bean Firmwareon on Samsung Galaxy Star GT-S5280

Samsung Galaxy Star GT-S5280 can now be updated with the XXAMI2 Android 4.1.2 Jelly Bean official firmware. The latest firmware build version is S5280XXAMI2. The device was released with Android 4.1.2 Jelly Bean . Samsung is yet to release Android 4.2.2 Jelly Bean or any further android version for the device. If you own the device and not yet updated any latest firmware, then update this latest firmware using our simple tutorial below. The below guide will help you to download and install the S5280XXAMI2 Android 4.1.2 Jelly Bean firmware manually through Odin. You can check  latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

As the Galaxy Star S5280 already running on Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement. So, want to update your Galaxy Star S5280 to the latest XXAMI2 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 XXAMI2 firmware on your Galaxy Star S5280 through Odin.

Android 4.1.2 Jelly Bean S5280XXAMI2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Star GT-S5280 model.

South Africa: S5280XXAMI2_S5280OJVAMI1_XFA.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage
• Install USB driver for your device on your computer

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Star S5280

1. Download Android 4.1.2 XXAMI2 Firmware for Galaxy Star S5280 from the above list
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy Star S5280 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Star S5280 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: S5280XXDLJ5_S5280ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congrats! you just completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Star GT-S5280. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Star should now running on the latest Android 4.1.2 Jelly Bean build version XXAMI2. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.